|
|
|
Antec Cable/Floppy Disk Drive round airflow-design 16 inch Floppy Drives
|
|
Antec CABLE/FLOPPY DISK DRIVE ROUND AIRFLOW-DESIGN 16 INCH
Features
Cable/Floppy Disk Drive round airflow-design 16 inch
|
|
|
|
|
|
Ask a mechanic - 8/10/07
compression test done. ALL FLOPPY IN THE HAND Q: Isometimes happen on some front-wheel drive cars. Failing that, it mustfailure of a gearbox or final-drive shaft bearing, but if the latterprobably only happening when you drive the car at speed because this
' |
|
|
|
|
|
|
|
|
|
|
Floppy dirives
 |
Read / Write Heads - are used to convert binary data to electromagnetic pulses. While writing to the disk or the reverse when reading. In short, the head is used to read and write data to the diskette.
|
|
Head Actuator - device that physically positions the read/write head over the correct track on the surface of the disk.
|
|
Spindle Motor - is what spins the floppy drive when it is in the drive. When you insert the disk, clamps that are attached to the spindle motor, grasp and turns the disk as it spins.
|
|
Logic board – controlling the internal parts of the drive (read/write heads, the spindle motor, head actuator and other components.) and also assisting as an interface between the internal parts and the floppy drive controller.
|
|
Disk Sensor - a special sensor and a signal on the floppy cable that lets tells the floppy controller when a disk is to be ejected and a new one to be inserted. |
|
|
|
|
|
|
|
|
|
|
|
|
(18).gif)